Car TPMS Tyre Pressure Monitoring System with Low-Pressure Flow-Thru Sensors 0-87 PSI

Car TPMS Tyre Pressure Monitoring System with Low-Pressure Flow-Thru Sensors 0-87 PSI

Stay safe and in control on every drive with this Car TPMS Tyre Pressure Monitoring System featuring low-pressure flow-thru sensors. It delivers real-time tyre pressure and temperature data for up to four tyres, helping prevent blowouts, improve fuel efficiency, and extend tyre life. Designed for sedans, SUVs, and utes, its easy to install and lets you top up air without removing the sensors.

PRODUCT FEATURES

Real-time Monitoring

Provides real-time pressure and temperature for each tyre, which prevents dangerous blowouts, improves fuel efficiency, extends tyre life through even wear. Monitor your tyre pressure accurately from 0 to 87 PSI and temperature data within 1.5 PSI or 3F accuracy.

Monitors up to 4 tyres

Monitors up to 4 tyres, designed for Sedan Cars, SUVs and Utes.

Low Pressure Flow-Thru Sensors (0-87 PSI)

It comes with Low Pressure Flow-Thru Sensors that helps you add or adjust tire pressure without removing the sensor. Accurately detects tyre pressures from 0 to 87 PSI these are designed for typical passenger cars, SUVs, Utes, etc.

Easy Installation

The monitor plugs directly into the 12V auxiliary power outlet; there is no need for complex wiring or professional installation.

5 Alarms Modes for Enhanced Safety

High-Pressure Alarm: Triggers if a tyre pressure exceeds a safe, pre-set threshold, which can be caused by heat build-up or overinflation.
Low-Pressure Alarm: Alerts the driver when tyre pressure drops below a minimum safe level, which is a key safety feature to prevent underinflation, potential tyre damage, and accidents.
High-Temperature Alarm: Warns if the internal temperature of a tyre exceeds a certain limit, often an indication of overwork, underinflation, or a mechanical issue.
Fast Leakage Alarm: Provides an immediate warning in the event of a quick loss of air pressure, such as from a puncture.
Sensor Low Battery Alarm: Indicates when a specific TPMS sensor's internal battery is running low, ensuring the system remains functional.

TPMS Sensor ID Learning Steps

Step 1: In standby mode, press the ""SET"" button 5 times to enter learning ID mode.
Step 2: Short press the ""SET"" button to select the tyre location and install the sensor to the tyre valve.
Step 3: The sensor will automatically send its own ID to the display, wait until you hear six beeps to confirm that the code is received.
Step 4: After all sensors are programmed to the monitor, press and hold the ""SET"" button for 3 seconds to save the settings.

The middle button represents the tyre location; 0 is for the left front tyre (LF), 1 is for the right front tyre (RF), 2 is for the right rear tyre (RR) and 3 is for the left rear tyre (LR).

Colour Screen

Providing you clear and easy-to-read tyre pressure and temperature data in any light condition.

Wide Sensor Compatability

Designed to work with High-Pressure Flow-Thru TPMS Sensor (TPMS-HPE22), High-P